Dynamix E210 빠른 설치 매뉴얼
{카테고리_이름} Dynamix E210에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamix E210 2 페이지.
Dynamix E210에 대해서도 마찬가지입니다: 빠른 사용 설명서 (2 페이지)
페이지 인쇄
DYNAMIX IP PHONE E210
Quick Installation Guide
1. Open the box of Dynamix IP Phone E210, carefully check the packing list as
follow:
•
IP Phone
•
Handset
•
Handset Cord
•
RJ45 cable
•
Power adapter
•
CD
•
Quick Installation Guide
2. Plug Handset Cord into RJ11 interfaces (IP Phone and Handset), RJ45 cable
into the LAN interface.
3. Please, connect the power adapter to it.
4. IP Phone would be assigned IP address auto by a DHCP Server by default. If
there is not a DHCP server, you have to configure it manually. (On the phone,
press MENU button=> System Setting => Advanced Setting=>type Advanced
password (it is idle by default) and press OK button=> Network, and then you can
set IP address and Gateway etc. Besides, you can type "." by * button).
5. If you want to connect your computer into LAN at the same time, please
connect your computer to PC interface of the phone with a RJ45 cable.
1 pcs;
1 pcs;
1 pcs;
1 pcs;
1 pcs;
1 pcs;
1 pcs.
6. Buttons of IP Phone defined as follow:
Function Buttons (1):
•
Headset button,
•
Mute button,
•
Message button,
•
MENU button,
•
Volume button,
•
CONFERENCE button,
•
TRANSFER button,
•
REDIAL button,
•
HOLD button.
Dial Buttons (2):
Type digits and English characters.
Navigation Buttons (3): There are navigation buttons and an OK button. At
standby interface, you can use the navigation buttons for that: Up button-"Speed
Call" list, Down button-"Missed Calls" list, Left button-"Received Calls" list, Right-
"Dialed numbers" list.
7. On the phone, press MENU button=> System Setting => Advanced
Setting=>type Advanced password (it is idle by default) and press OK button=>
SIP=> Accounts SIP =>Account 1，and then set the parameter as follow:
Enable Account: Select Enable,
Username：Type your SIP account,
User Pwd：Type your SIP password,
SIP1：Type the IP address of your SIP server (you can type "." by * button，you
must confirm the connection between the phone and SIP server).
And then select Submit changes，and press OK button to submit the changes.
8. Type the IP address of IP phone in the browser, and type the username and
password (root, root by default) to login, and then you can set the phone on Web
page. For detail, you can refer to IP Phone User Manual.
__________________________________________________________________
Dynamix Promotions Ltd
http://www.godynamix.com
Sales:
E-mail:
Technical Support: E-mail: