ADENDORFF GCABSB-001 사용 설명서 및 부품 목록 - 페이지 6
{카테고리_이름} ADENDORFF GCABSB-001에 대한 사용 설명서 및 부품 목록을 온라인으로 검색하거나 PDF를 다운로드하세요. ADENDORFF GCABSB-001 8 페이지.
페이지 인쇄.. ..
.
,
...........
Note:Disconnect power and air before any maintenance!
All blasting system is prone to plugging or wear because of the
abrasive material used and the applications.The followig items
should be checked for wear as indicated:
Plugged Conditions
The blast nozzle may become plugged from moist media.Try
dislodging the media with a drill bit held in your hand.You
need to get rid of the mosit media.
if the abrasive pick-up hose appears plugged,cover the gun tip
and force the air back through this hose.Dust may fly up when
you do this so make sure the lid is down!
Wear conditions
This is usually noted when an excessive amount of dust appears
in the cabinet.Dust will occur if:
l.The abrasive blasting media is worn out . If it has lost its
granular or spherical appearance or has a lot of debris
from the parts being blasted and mixed in,replace it.This
is usually noticed when the abrasive media that exits the
nozzle looks like a smoke cloud coming instead of a stream
2.The air outlet vent is lugged or air flow out is blocked.
Cleaning this vent should help reduce dust in the cabinet.
This gun parts may wear may wear out.This is usually evident
1vhen tile blast pattern is too wide and ineffective,simply replace
nozzle or orifice
. To replace the transparent PVC board
At tile bottom of parts No. 1 transparent top lid ,thereis a 0.5mm
rleplaceable transparent PVC board.when at work,if the transparent
PVC board is getting unclear,it may be replaced with a new one
to avoid affecting the sight during work.
•
•.. . . •
. . . .
.
•
'
• . . · ···-·
J•''
•
MAINTENACE
___ _1.,
- -
•...
--··-·
···· ··-
--··- ·
•
/
O. S1 n1 n P V C b o a r d
/
/,,
5
. . .
·