Dynamix UM-S Series 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Dynamix UM-S Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynamix UM-S Series 2 페이지. G.shdsl modems/routers

Packing List

The contents:

♦ One Main Unit

♦ One DC Power Adapter

♦ One LINE Cable

♦ One Console Cable (DB9)

♦ One CD with User Manual.

Front Panel

Front Panel of SHDSL 4-wire/4-port router/bridge

Front Panel of SHDSL 2-wire/1-port router/bridge

Figure 1: Front Panel

Rear Panel

Figure 2: Rear Panel

Install the SHDSL Router

To avoid possible damage to this Router,

do not turn on the router before Hardware

Installation.



Connect the power adapter to the port labeled DC-

IN on the rear panel of the product.



Connect the Ethernet cable.

Note: If the 1-port router is directly connected to PC or

NB, the Ethernet cable has to be used cross over one.

If the 1-port router is connected to hub or switch, be

sure that the hub or switch supporting auto-sensing. If

yes, both cross over and none cross over Ethernet

cable are suitable. If not, only pass through Ethernet

cable could be used. The 4-port router supports auto-

MDIX switching hub so both through and cross-over

Ethernet cable can be used.



Connect the phone cable to the product and the

other side of phone cable to wall jack.



Connect the power adapter to power source.



Turn on the PC or NB which is used for

configuration the Router.

Connections

Figure 3: Direct Connection with PC or NB for

1-port router

Figure 4: Connection with Hub/Switch for

1-port router

Figure 5: 4-port router with complex network

topology