Galanz W3A1G2-0E0 사용자 설명서 - 페이지 3

{카테고리_이름} Galanz W3A1G2-0E0에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galanz W3A1G2-0E0 11 페이지.

페이지 인쇄

During installation, the power supply must not be excessively or dangerously bent or flattened.

Do not tamper with controls.

The appliance is to be connected to the water mains using new hose sets, and the old hose-sets

should not be reused.

Make sure that the carpet must not obstruct the openings at the bottom base.

Use the dishwasher only for its intended function.

This appliance is intended to be used in household and similar applications such as:

– staff kitchen areas in shops, offices and other working environments;

– farm houses;

– by clients in hotels, motels and other residential type environments;

– bed and breakfast type environments.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY

SAVE THESE INSTRUCTIONS

2．Disposal

Dispose of the dishwasher packaging material correctly.

All packaging materials can be recycled.

Plastic parts are marked with the standard international abbreviations:

(e.g. PS

for polystyrene, padding material)

This appliance is identified according to the European guideline

2012/19/EU on waste electrical and electronic equipment -WEEE. The

guideline specifies the framework for an EU-wide valid return and re-use of

old appliances.

WARNING!

Packaging material could be dangerous for children!

For disposing of package and the appliance please go to a recycling centre. Cut off the power

supply cable and make the door closing device unusable.

Cardboard packaging is manufactured from recycled paper and should be disposed in the waste

paper collection for recycling.

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product.

For more detailed information about recycling of this product, please contact your local city office

and your household waste disposal service

IMPORTANT!

To get the best performance from your dishwasher, read all

operating instructions before using it for the first time.

3. Installation instruction

This dishwasher should be installed before use. Please do not use the machine before inlet

pipe and discharge pipe are installed!

Pipe opening installation

Schematic diagram of correct installation

Install pipes and power line at the corresponding installation openings.

1. Draining hose

2. Inlet hose

3. Power cord

Installation of discharge pipe

1. Installation opening of discharge pipe.

2. Insert the "double wire clamp" into the discharge pipe.

3. Put the discharge pipe into the installation opening and buckle the "double

wire clamp" inward.

Connect to water source

Connecting the water

inlet hose

Connect the cold water supply hose to a threaded 3/4(inch)

connector and make sure that it is fastened tightly in place.

If the water pipes are new or have not been used for an

extended period of time, let the water run to make sure that

the water is clear and free of impurities. If this precaution is

not taken, there is a risk that the water inlet can get blocked

and the appliance could be damaged.