8x8 Inc MP-114 빠른 시작 매뉴얼

{카테고리_이름} 8x8 Inc MP-114에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 8x8 Inc MP-114 6 페이지. Analog phone and fax

Q U I C K S T A R T G U I D E

AudioCodes MP-112, MP-114, MP-118, and MP-124 ATAs

Quick Start Guide (Analog Phone and Fax, 2-24 ports)

Activating Your AudioCodes ATA

You need your activation code (received via email) to activate your AudioCodes ATA. The activation code is received via email. You

can also retrieve the code via 8x8 Account Manager, if you have administrator access, by following these instructions:

1. Go to login.8x8.com.

2. Enter your administrator username and password, click Login.

3. In the Application Panel, click the Account Manager icon to launch the application.

4. Click Phone System in the top navigation bar, and select View All Extensions.

5. Click Activate Device next to the extension you wish to activate. A pop-up displays the activation code for the extension.

Note: If you are activating an Overhead Paging system, follow the special instructions provided in the pop-up.

6. To activate your device for voice or fax service, connect an analog phone (or fax machine with a phone) to the FXS port on the

AudioCodes ATA that you want to activate.

7. Lift the handset, and follow the voice instructions to dial in the activation code. You hear a message confirming your ATA is

activated. The device should reboot automatically; you should only manually reboot the ATA if it does not reboot after 10

minutes, and if there is no dial tone on an attached analog device.

Note: If you activate any port on the ATA, the other ports on the same ATA should activate automatically.

AudioCodes MP-112

AudioCodes MP-114

AudioCodes MP-118

AudioCodes MP-124