9.Solutions C-pan Arm 사용자 지침 - 페이지 8
{카테고리_이름} 9.Solutions C-pan Arm에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. 9.Solutions C-pan Arm 12 페이지.
페이지 인쇄Tilted and vertical movements:
To easily tilt the C-pan arm into a vertical or sloped
position, move the arm out to the right side and (while
holding the arm firmly) loosen the green fulcrum handle
and tilt the arm to the desired position.
Always insure that the rosette teeth intermesh correctly
when tightening down the green handle. Do not let go of arm
before having insured that the fulcrum connection is
secured.
C-Pan arm can be set at any sloped angle between 0 and
90 degrees at intervals of 15 degrees. Do not set it in-
between where rosette teeth don't lock it securely in
position.
Set the arm at any desired angle from horizontal to vertical.
Adjust camera tilt plate to accommodate the position of
the arm.
It is not recommended to make adjustments to the curvature
of the movement when the arm is in a vertical position. There
is a lot of pressure on the gears making readjustments
difficult to do. But if needed, try to ease the weight on the
gears by separating the two arms simultaneously while
making the adjustment.
Do show caution if the above is to be done.
8
of
12