909 DH1500 사용 설명서 - 페이지 5
{카테고리_이름} 909 DH1500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 909 DH1500 10 페이지. 1500w demolition breaker
페이지 인쇄4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application.
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn
it on and off.
Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools.
Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use.
Many accidents are caused by poorly
maintained power tools.
f ) Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge,
unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
The correct power tool will
Properly
i) Children should be supervised to ensure that they do
not play with the appliance.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
will ensure that the safety of the power tool is maintained.
Additional safety rules
for demolition breakers
•
Before breaking into walls, floors etc., ensure there are
no concealed power cables or pipes in the cavity.
•
Always use the front handle, this gives you greater
control and ensures safe operation.
•
Keep the cord clear of the accessory being used, do not
wrap the cord around your arm or wrist.
•
Hold the tool by the insulated gripping surfaces when
performing an operation where the accessory may
contact hidden wiring or its own cord.
•
Use thick cushioned gloves and limit the exposure time
by taking frequent breaks. Vibration caused by the
hammer action may be harmful to your hands and arms.
•
When removing an accessory from the tool avoid contact
with skin and use proper protective gloves when grasping
the bit or accessory. Accessories may be hot after
prolonged use.
•
Use hearing protection.
WARNING!
Some dust created by power sanding, sawing,
grinding, drilling and other construction activities contain
chemicals known to cause cancer, birth defects or other
reproductive harm.
Some examples of these chemicals are:
•
Lead from lead-based paints;
•
Crystalline silica from bricks, cement and other masonry
products, and;
•
Arsenic and chromium from chemically-treated timber.
The risk from such exposures vary depending on how
often you do this type of work. To reduce your exposure
5
This