dBTechnologies SUB915 빠른 시작 사용 설명서 - 페이지 3
{카테고리_이름} dBTechnologies SUB915에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dBTechnologies SUB915 4 페이지.
페이지 인쇄3) First switch on
The DIGIPRO G3 amplifier of SUB 915 is controlled by a
powerful DSP. All the connections and controls are in
the rear amplifier control panel:
SUB 915
www.dbtechnologies.com
1
Input (balanced) connector
2
Output Xover/Link (balanced) connector
3
RDNet Data In
4
RDNet Data Out
5
RDNet status LEDs
6
Subwoofer delay [ms] rotary
7
Xover/Link frequency selector
8
General Status LEDs
9
Input sensitivity
10
Subwoofer polarity
11
Usb data service
12
Mains Input (Auto-range)
13
Mains Link
14
Mains Fuse
The subwoofer is supplied with one mounted fuse for
operation within the 220-240V~ range. If you need to
operate in the 100-120V~ voltage range:
Disconnect all connections, including the power
supply
Wait 5 minutes
Replace the fuses with the ones provided in the
package for the 100-120V~ range
a) Once you have properly set up the desired
configuration (see also the SUB 915 complete user
manual and accessories instructions for further
information), connect the audio input (1). Set the
Subwoofer polarity (10) and Input Sensitivity (9) to the
desired level.
b) Connect the possible Xover/Link output (2) and
adjust the related frequency (7).
c) Adjust the subwoofer delay (6)
d)
In case of remote control, connect the Data Input (3)
to the hardware remote controller (RDNet Control 2 or
RDNet Control 8) with cables equipped with etherCON
connectors. Then connect the Data Output (4) to the
Data Input (3) of a possible second device, and so on.
When the RDNet network is on and it has recognized
the connected device, the LED "Link" (5) is on. The
other LEDs (5) "Active" start blinking at the presence of
data transmission, the "Remote Preset Active" advise
that all the local controls set on the amplifier panel
(level, DSP presets, etc.) are by-passed and controlled
remotely by RDNet.
In remote control it is essential the use of free
dBTechnologies software:
•
dBTechnologies AURORA NET,
necessary for an in-depth real-time control of different
devices;
e)
Connect the power supply (12). It is possible to link
other sub 915 using mains link connector (13) (see
Technical Data for further information).
Check the complete user manual on
information about the system and available accessories.
Scarica il manuale completo da
ulteriore informazione sul sistema e sugli accessori disponibili.
Für weitere Informationen und verfügbares Zubehör lesen sie bitte die
vollständige Bedienungsanleitung unter
www.dbtechnologies.de.
Vérifiez le manuel de l'utilisateur complet sur
pour des informations complémentaires du système et des accessoires
disponibles.Compruebe
www.dbtechnologies.com
y accesorios disponibles.
www.dbtechnologies.com
www.dbtechnologies.com
www.dbtechnologies.com
el
manual
de
usuario
para la información adicional sobre el sistema
420120322Q REV 1.0
for further
per ogni
completo
sobre