dBTechnologies B-Hype M 빠른 시작 사용 설명서 - 페이지 4
{카테고리_이름} dBTechnologies B-Hype M에 대한 빠른 시작 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dBTechnologies B-Hype M 8 페이지. Bi-amp battery-powered speaker
페이지 인쇄4) Turn on and synchronize your transmitter
to the receiver module R-BHM
A – STATUS LED
B – POWER/MUTE SWITCH
C – IR LENS
D – GAIN (INPUT SENSITIVITY)
E – PLASTIC SCREWDRIVER FOR [D] GAIN
F – BATTERY COVER
VIO L208
www.dbtechnologies.com
G – ANTENNA
H – STATUS LED
I – POWER/MUTE SWITCH
L – 4-POLE CONNECTOR FOR HEADSET
M – PLASTIC SCREWDRIVER FOR [N] GAIN
N – GAIN (INPUT SENSITIVITY)
O – IR LENS
P – BATTERY COVER
1. Turn on the B-HYPE MOBILE (see chapter 8 for
further information), and check that the MASTER
Volume is on a medium/low level (see chapter
6).
2. Unscrew the battery cover [F] of HT-BHM or
open the [P] one of BT-BHM
3. On the transmitter, hold down for some seconds
the "POWER" button [B], or [I] (for HT-BHM or
BT-BHM).
4. On the receiver, select one of the eight available
channels by pressing shortly [X] or [Z] buttons.
5. Hold down for some seconds the [X] button,
then release it. The CHANNEL number in the
display starts blinking.
6. The IR LENS of the transmitter must be faced
with the display of the RECEIVER MODULE R-
BHM as shown in the pictures.
7. The transmitter is then synchronized to the
receiver in some seconds, and the CHANNEL
number in the display become fixed.
8. RF indicator in the display shows the wireless
reception
transmitter, the AF the audio volume one. You
can enter the related submenus by pressing SET
button. In the transmitter you can set the gain
([D] or [N]) with the related screwdriver [E] or
[M].
9. Screw the battery cover [F] of HT-BHM or close
the [P] one of BT-BHM.
4
intensity
with
a
synchronized
cod. 420120268Q PRELIMINARY