Hifonics MAXXIMUS Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} Hifonics MAXXIMUS Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hifonics MAXXIMUS Series 8 페이지. High-end spl-subwoofer

페이지 인쇄

FEATURES

• Warp resistant aluminum die-cast basket

• Triple magnet motor with 3 x 100 oz. ferrite magnet

• 4" / 100 mm dual-voicecoil with copper flat wire, winding heigth 57,5 mm

• Black anodized voice coil strap

• Kevlar/cellulose composite sandwich-cone

• Elastic long-stroke surround, 2-fold sewed with cone

• 3-fold constructed Nomex spider

• Chromed pole plate,12 mm

• Chromed T-yoke, 25 mm

SPECIFICATIONS

Load capacity:

Recommended amplifier output power: 1200 to 1700 Watt RMS

Impedance:

Resonance frequency fs:

Qts:

VAS:

SPL:

Linear Xmax:

Outer diameter:

Mounting hole:

Mounting depth:

Weight:

MXS 12 REFLEX (optional empty enclosure)

HiFonics developed an perfect tuned vented (bassreflex) enclosure for the

MXS12D2, which is optimized for the sound characteristics of the subwoofer.

The empty enclosure HiFonics MXS12REFLEX is available at your local retailer.

IMPORTANT NOTES

• For your personal concerns you should choose a appropriate sound level for the

subwoofer enclosure, that neither the roadworthy of the driver nor his concentration

will be disturbed, that he is able to notice possible traffic noises and acoustical

warning signals.

• Modern car audio soundsystems provide very high acoustic pressure beyond the

100 dB mark. Please observe in this case, that permanent use of high sound levels

may cause damage to your ability of hearing.

ENGLISH

MAXXIMUS SERIES

1500 Watts RMS / 3000 Watts max.

2+2 Ohms

31 Hz

0,44

30 Litres

85 dB at 1 Watt / 1 m

+/- 23 mm

318 mm

283 mm

216 mm

21,7 kg