Hifonics VULCAN VX690A 소유자 매뉴얼 - 페이지 12

{카테고리_이름} Hifonics VULCAN VX690A에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hifonics VULCAN VX690A 17 페이지. Active subwoofer system
Hifonics VULCAN VX690A에 대해서도 마찬가지입니다: 사용자 지침 (2 페이지)

페이지 인쇄
Hifonics VULCAN VX690A 소유자 매뉴얼

FEATURES AND OPERATIONAL CONTROLS

LEVEL
1
MIN.
LPF
2
50 Hz
BASS BOOST
3
0 dB
VX690A
300 WATTS MAX.
The OUTPUT LEVEL controller allows you to adjust the volume to match the sound system with the head unit. Please avoid
1
any distortions while listening. If the enclosed bass remote (#8) is connected, the OUTPUT LEVEL controller is without function.
The LOW PASS controller (low pass filter) adjusts the cut-off point of the frequency range to above. The cut-off frequency is
2
continuously adjustable from 50 Hz to 150 Hz.
The BASS BOOST controller allows to enhance the bass continuously from 0dB to +12dB at 45 Hz.
3
The PHASE SHIFT switch allows to switch the phase from 0° to 180°. Hence, you are able to adjust the subwoofer perfect to
4
the vehicle's acustics.
The INPUT LEVEL switch determines the type of input signal. If you want to operate the sound system with a linear preamplifier
5
signal (low level), the switch must be in position LOW. If you want to operate the sound system with the speaker outputs of the
head unit (high level), the switch must be in position HIGH. Please refer to the instructions under #9.
12

FUNCTIONAL INSTRUCTIONS

4
5
PHASE
INPUT
SHIFT
LEVEL
0°
LOW
REM
DC OFFSET
180°
HIGH
AUTO
MAX.
BASS LEVEL
POWER
PROTECT
150 Hz
CONTROLLER
AUDIO INPUT
POWER INPUT
12 dB
7
8
6
AUTO
TURN ON
9
FUSE