dbx 131s Graphic EQ 사양 - 페이지 2
{카테고리_이름} dbx 131s Graphic EQ에 대한 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. dbx 131s Graphic EQ 2 페이지. 2-series graphic equalizers
dbx 131s Graphic EQ에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)
페이지 인쇄
Specifications
I N P U T S :
Connectors:
1/4" TRS, female XLR (pin 2 hot)
Type:
Electronically balanced/unbalanced, RF filtered
Impedance:
Balanced 40kΩ, unbalanced 20kΩ
Max Input Level:
>+21dBu balanced or unbalanced
CMRR:
>40dB, typically >55dB at 1kHz
O U T P U T S :
Connectors:
1/4" TRS, male XLR (pin 2 hot)
Type:
Impedance-balanced/unbalanced, RF filtered
Impedance:
Balanced 100Ω, unbalanced 50Ω
Max Output Level:
>+21dBu balanced/unbalanced into
2kΩ or greater
>+18dBm balanced/unbalanced (into 600Ω)
S Y S T E M P E R F O R M A N C E :
Bandwidth:
20Hz to 20kHz, +0.5/-1dB
Frequency Response:
<10Hz to >50kHz, +0.5/-3dB
Dynamic Range:
Typically >112dB
Signal-to-Noise:
Typically >95dB
THD+Noise:
<0.003%
Interchannel Crosstalk:
<-90dB, 20Hz to 20kHz
dbx engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to change without notice.
dbx Professional
8760 S. Sandy Pkwy.
Products
Sandy, Utah 84070
131s Graphic EQ
s
F U N C T I O N S W I T C H E S :
EQ Bypass:
Low Cut:
Range:
P O W E R S U P P LY :
Operating Voltage:
Power Consumption:
Mains Connection:
P H Y S I C A L :
Weight:
Dimensions:
1.801.568.7660
PHON E
1.801.568.7662
FAX
Single 31-Band Equalizer
Bypasses the graphic equalizer
section in the signal path
Activates the 50Hz 12dB/octave
high-pass filter
Selects either +/- 6dB or +/- 12dB
slider boost/cut range
100-240VAC 50/60Hz
15W
IEC receptacle
4.8 lbs.(2.2 kg) Shipping weight 6.2 lbs. (2.8 kg)
1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W
1.801.568.7583
www.dbxpro.com
INT'L FAX
Part number: 18-0843