dbx 1074 사용자 설명서 - 페이지 12

{카테고리_이름} dbx 1074에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dbx 1074 16 페이지. Quad noise gat
dbx 1074에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

Section 2

2.1 Basic Connection of the 1074

31074 User Manual

Setup and Applications

• Turn off all equipment before making any connections.

• Install the 1074 in your rack with the provided rack screws. It is essential that when the 1074

is being mounted in a rack mounting enclosure, the unit should be positioned with enough

room (at least 1U of space above the unit and 1U of space at the below the unit) to allow

proper ventilation. The 1074 should not be mounted above or below anything that gener-

ates excessive heat. Ambient temperatures should not exceed 113

is in use. Although the unit is shielded against radio frequency and electromagnetic inter-

ference, extremely high fields of RF and EMI should be avoided where possible.

• Make audio connections via XLR plugs.

For input and output connections, use the XLR balanced or unbalanced connections. For Key

input applications, use 1/4" TRS balanced or unbalanced connections.

• Apply power to the 1074. Connect the AC power cord to the AC power receptacle on the

back of the unit. Route the AC power cord to a convenient power outlet away from audio

lines. The unit may be turned on and off from the rear panel power switch or from a master

equipment power switch.

1). Gating Dry and Percussive sounds such as snare Drum and Kick Drum.

2). Gating sounds that have longer decay times such as cymbals and

Pianos

3). Gating Hum or Buzz from live instruments or recorded tracks.

4). Eliminating Headphone leakage into microphones.

5). Gating instrument microphones to eliminate amplifier bleed.

6). Adding Dynamics to a track or mic'd instrument.

7). Suppress feedback by gating microphones.

8). Control gating action by an external signal at the Key Input on the

rear panel.

9). "Tighten Up" a room by gating out undesired ambience.

1074

F (45

C) when equipment