Galaxy 25363802202 사용 및 관리 매뉴얼 - 페이지 7
{카테고리_이름} Galaxy 25363802202에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy 25363802202 15 페이지. Top mount refrigerator
페이지 인쇄Door Removal and Reversal Instructions
Tools 14ecessory:
_
Phillis" head
Ouadrex
neoa
_
Socl_t
Adlustable
screwdriver
Wrench Set
'_ench
?
DOOR
REMOVAL
AND
REVERSAL
INSTRUCTIONS:
Cabinet Hole
• _
Top Hinge
Plugs
]
Hinge Hole "_
Plug
NOTE: The direction in which your refrigerator doors open (door swing)
can be reversed, from left to right or right to left, by moving Lhedoor
hinges from one side to the other. Reversing the door swing should be
performed by a qualified person.
IMPORTANT: Before you begin, turn the refrigerator temperature control
to "0" and remove the electrical power cord from the walt outlet. Remove
any food from door shelves.
Door
Screw_
Stop
/Hinge
SCI_NS
Hinge
Hole
Plug
Door Stop
Door
krew_
Stop
_
Hinge
1.
Remove top hinge cover.
2.
Remove top hinge with 3/8" hex driver and lift freezer door off of
center hinge pin. Set door aside.
3.
Unscrew center hinge pin using adjustable wrench and save for
reassembly. Ensure plastic washer stays on hinge pin.
4.
Lift refrigerator door off of Bottom hinge and set aside.
5.
Remove center hinge and shim by removing inside screw and
loosening two outside screws enough to allow hinge and shim to
slide out. Tignten screws.
6.
Loosen two outside screws on opposite side of refrigerator, remove
inside screw and install center hinge.
7.
Remove bottom hinge with 3/8" hex driver. Reinsert two outside
screws in holes and tighten. Inside screw will go to opposite side
in step 8.
8.
Remove two outside screws on opposite side of refrigerator and
install bottom nmge. Insert and tighten screw saved from step 7.
9.
Unscrew bottom hinge pin using adjustable wrench. Move hinge pm
to other hole in hinge and tighten with adjustable wrench.
10. Move freezer and refrigerator door stops to opposite side. Before
starting screws use an awl to puncture the foam.
11. _osition refrigerator door onto bottom hinge pin and screw center
hinge pin through center hinge into top of door. Close refrigerator
door to help align hinge hole.
12. Tighten center hinge pin with adjustable wrench.
13. Remove cabinet and hinge hole plugs and move to opposite side.
14. Lower freezer door onto center hinge pin.
15. Close freezer door. Have an assistant lift up on opposite side of
door while tightening screws to install top hinge.
16. Replace top hinge cover.
17. Plug n electrical 3ower cord and turn refrigerator temperature control
to center position. Adjust setting as necessary.