Galaxy Electronic Ballast 설치 및 운영 지침 - 페이지 2
{카테고리_이름} Galaxy Electronic Ballast에 대한 설치 및 운영 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Electronic Ballast 4 페이지.
페이지 인쇄
Keep original packaging— all returns need to be in the original packaging in order to avoid
product damage during shipping. Any damage to products not in their original packaging will not
be covered under warranty.
Safety First! Failure to observe the following safety warnings may result in serious injury. In
addition, failure to observe these safety warnings will result in a waiver of all liabilities and
will void all warranties.
WARNING
If the exterior of the lamp is damaged, replace lamp immediately.
When re-lamping, make sure lamp has time to cool before touching.
Make sure power cord and lamp cord are connected properly.
Disconnect power before re-lamping.
DO NOT hang by power or lamp cord.
DO NOT make contact with the interior of the socket while power is on.
DO NOT operate light systems in wet locations.
DO NOT plug this system into a supply voltage other that what is instructed on the ballast.
DO NOT attempt to rewire or reconfi gure your system, it will void the warranty and could
cause serious safety hazards (i.e. power cord, lamp cord, lamp socket or ballast).
Keep away from children.
SAFETY FIRST!
DO NOT alter or modify this unit in any way. It may cause bodily injury or death as this is a
high power electrical device.
DO NOT submerse in water or splash water on the unit.
DO NOT plug or unplug the lamp cord while the ballast is plugged in to 120 or 240V power.
These high performance Electronic Ballasts are also extremely effi cient. They have a high
power factor as well as high luminous effi cacy. It's stable performance creates constant power
output even when power fl uctuates (power surge). It is incorporated with a short circuit
protection technology that prevents damage to the lamp and other ballasts connected in the
same circuit.
IMPORTANT PRODUCT
INFORMATION