909 T12 Series 매뉴얼 - 페이지 11
{카테고리_이름} 909 T12 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 909 T12 Series 17 페이지.
페이지 인쇄Personal safety
Stay alert, watch what you are doing and use common
•
sense when operating a power tool.
tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment. Always wear eye
•
protection.
Protective equipment such as a dust mask, non-skid
safety shoes, a hard hat, or hearing protection will reduce personal
injuries.
Avoid accidental starting.
•
position before connecting to a power source and/or battery pack, or
picking up or carrying the tool. Carrying power tools with your finger
on the switch or plugging in power tools that have the switch "on"
invites accidents.
Remove any adjusting key or wrench before turning
•
the power tool on.
A wrench or key left attached to a rotating
part of the power tool may result in personal injury.
Do not overreach.
•
Keep proper footing and balance at all
times. This enables better control of the power tool in unexpected
situations.
Dress properly.
•
Do not wear loose clothing or jewellery. Always
wear eye and ear protection and use a dust mask. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry
or long hair can be caught in moving parts.
If devices are used for dust extraction and collection,
•
ensure these devices are connected and used properly. Use of dust
collection devices can reduce dust-related hazards.
Do not use on a ladder or unstable support.
•
footing on a solid surface allows for better control of the power tool
in unexpected situations.
Power tool use and care
Do not force the power tool.
•
your application. The correct power tool will do a better and safer job
if used for the function it was designed for.
Touch_IM_ED8.indd 11
DO NOT use a power
Ensure the switch is in the "off"
Stable
Use the correct power tool for
Do not use the power tool if the switch does not turn
•
it on and off.
Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
•
the battery pack from the power tool before making
any adjustments, changing accessories, or storing the
power tool.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and
•
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool.
tools are dangerous in the hands of untrained users.
Maintain power tools with care.
•
binding of moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean.
•
cutting tools with sharp cutting edges are less likely to bind and are
easier to control.
Use the power tool, accessories, tool bits, etc., in
•
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different from
those intended could result in a hazardous situation.
Battery tool use and care
Ensure the switch is in the "off" position before
•
inserting the battery pack.
power tools that have the switch "on" invites accidents.
When recharging, use only the charger that is
•
specified by the manufacturer.
one type of battery pack may create a risk of fire when used with
another battery pack.
Use only specifically designated battery packs with
•
power tools.
The use of any other battery pack may create a risk
of injury or fire.
11
Power
Check for misalignment or
Properly maintained
Inserting the battery pack into
A charger that is suitable for
22/10/13 4:39:56 PM