Dynapac CA 250 워크샵 매뉴얼 - 페이지 8

{카테고리_이름} Dynapac CA 250에 대한 워크샵 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynapac CA 250 11 페이지. Vibratory roller
Dynapac CA 250에 대해서도 마찬가지입니다: 워크샵 매뉴얼 (20 페이지)

페이지 인쇄

FITTING

Fig. 9 Fitting the teeth

Fig. 10 Fitting the PD scraper

5 mm

(3/16")

Fig. 11 Fitted shims

1. Shims

13. Fit the teeth on the PD scraper.

14. Fit the PD scraper 34 58 77 (item 2 in drawing

38 22 20). Weight about 275 kg (600 lbs).

Keep well clear of the hoisted object.

Ensure that hoisting hooks are securely

anchored.

15. Place shims (1) so that the scraper teeth are posi-

tioned symmetrically between the pads.

Remember that the rubber elements are pre-

tensioned; use only enough shims to leave an

air gap of about 5 mm (3/16") between the

scraper and the drum frame, before the

scraper bolts are tightened.

CA 250/252/262 W1065EN2