Galaxy Audio ANY SPOT 사용자 설명서 - 페이지 5
{카테고리_이름} Galaxy Audio ANY SPOT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Audio ANY SPOT 12 페이지. Dual channel system uhf
Galaxy Audio ANY SPOT에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 사용자 설명서 (20 페이지)
페이지 인쇄
1
Antenna A LED.
When lit, Antenna A is active.
2
Antenna B LED.
When lit, Channel B antenna is active.
3
LCD Panel.
Please See"system setup"on page 7.
4
System setting button.
Please See"system setup"on page 7.
5
DOWN button of the System Menu.
Please See"system setup"on page 7.
1
Power Adapter Connection. Use only supplied adapter or
equivalent.
2
Fine adjustment of mute threshold level.
Use this to set the threshold of the mute, which is factory
set and usually does not need to be adjusted. If there are
any interference signals, this threshold value can be increased
by turning the knob clockwise until RF signal lamp goes out.
3
¼" Audio Output Jack.
6
UP button of the System Menu.
Please See"system setup"on page 7.
7
IR window.
This window sends an infrared signal to the transmitter
for frequency synchronization.
8
Synchronizing signal transmit button
Press this button to establish infrared connection
between the receiver and transmitter.
9
Power switch
Press and Hold for Power On/Off.
4
XLR Audio Output.
5
Antenna Jack B 50 ohm.
6
Antenna Jack A 50 ohm.