Galaxy Audio ANY SPOT 사용자 설명서 - 페이지 9

{카테고리_이름} Galaxy Audio ANY SPOT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Audio ANY SPOT 20 페이지. Dual channel system uhf
Galaxy Audio ANY SPOT에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 사용자 설명서 (12 페이지)

Galaxy Audio ANY SPOT 사용자 설명서
2. Selecting Frequency
Press
button. The GP flashes to indicate the group can be chosen by
pressing the
return back to the original state without any operation within 5 seconds.
Press
to confirm the group selection, the CH flashes to indicate the
channel can be chosen, press the
again to exit setting mode automatically after confirmation.
When choosing frequencies from the "U" group, press
top three numbers before the point flash, press
1MHz for every push, and press
number after the point blink, press
for 25kHz.
SET
AUTO
SQL
SET
AUTO
SQL
3. SQL Setting and Change
The CTSR receiver has a build-in adjustable SQL (Squelch Level) function
which silences the output when the receiver does not get a strong or quality
signal from the transmitter, instead of reproducing noise. When squelch is
adjusted, the threshold of the signal quality or level is adjusted.
Press SQL
or
lower reception sensitivity and stronger anti-interference ability.
Use the lowest setting that rejects noise. High settings will dramatically
reduce range.
or
button, to confirm press the
to change the value. The higher value means the
SET
AUTO
SQL
or
button to choose, Press
or
again to confirm, then the last three
or
buttons to choose, every step
SET
System Setup
System Setup
button. It will
button, and the
buttons to choose,
SET
AUTO
SQL
SET
7