dbx 160A 사용 설명서 - 페이지 18
{카테고리_이름} dbx 160A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dbx 160A 20 페이지. Compressor limiter
dbx 160A에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)
페이지 인쇄
dbx 160A COMPRESSOR / LIMITER
SPECIFICATIONS
Input (1/4" TRS Phone and XLR)
Impedance
Maximum Level
CMRR
Detector Input (1/4" TRS Phone)
Impedance
Maximum Level
Output (XLR)
Impedance
Maximum Level (Balanced)
Maximum Level (Unbalanced)
Noise
Frequency Response
THD+N
Output ( 1/4" TRS Phone)
Balancing
Impedance
Maximum Level
Dynamic Range
Gain Adjustment Range
Threshold Range
Threshold Characteristic
Compression Ratio
Attack Time
Release Time
Stereo Coupling
Power Cord
Operating Voltage
Operating Temperature
Dimensions (H x W x D)
Rack Space
Weight
Notes:
Specifications are subject to change
14
Floating Balanced; XLR: Pin 2 Hot, Phone: Tip Hot
100kΩ balanced, 50kΩ unbalanced
+24dBu, Balanced or Unbalanced
>45dB (any frequency)
Floating Balanced
400kΩ balanced, 200kΩ unbalanced
+28dBu, Balanced or Unbalanced
Floating Balanced; Pin 2 Hot
30Ω
+ 24dBm; <0.3% THD
+20dBm; <0.3% THD
<-90dBu, Unweighted (20Hz - 20kHz)
20Hz - 20kHz, + 0, -0.5dB; +0, -3dB 0.5Hz and 90kHz
<0.2%, Typical, Any Amount of Compression up to 40dB @ 1kHz
Unbalanced
20Ω
+24dBm
>113dB
Variable from -20dB to +20dB
-40dBu to +20dBu
Variable 1:1 to ∞:1 thru to -1:1; >60dB Maximum Compression
Program-Dependent; Typically 15ms for 10dB, 5ms for 20dB, 3ms
for 30dB
Program-Dependent; Typically 8ms for 1dB, 80ms for 10dB,
400ms for 50dB; 125dB/Sec Rate
True Power Summing; 1/4" TRS Phone Jack; 160A only
IEC-Type Connector
100-120VAC or 220-240VAC
50/60Hz or 120V 60Hz
0°C to 35°C (32°F to 95°F)
1.75" x 19" x 6.5" (4.45cm x 48.2cm x 16.51cm)
1 Rack Unit (1U High)
Net Weight: 4.42 lbs (2.00 kg)
Shipping Weight: 6.62 lbs (2.99 kg)
Noise and frequency response specifications are at unity gain.
0dBV=1.0Vrms; 0dBu=0.775Vrms
Selectable OverEasy® or Hard Knee