dbx 160A 사용 설명서 - 페이지 3
{카테고리_이름} dbx 160A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. dbx 160A 20 페이지. Compressor limiter
dbx 160A에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지)
페이지 인쇄
eLectroMaGnetIc
coMPatIBILIty
this unit conforms to the product specifications noted on the
Declaration of Conformity. operation is subject to the following two
conditions:
• this device may not cause harmful interference, and
• this device must accept any interference received, including
interference that may cause undesired operation.
operation of this unit within significant
electromagnetic fields should be avoided.
• use only shielded interconnecting cables.
u.K. MaInS PLuG WarnInG
A molded mains plug that has been cut off from the cord is
unsafe. discard the mains plug at a suitable disposal facility.
NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU
INSERT A DAMAGED OR CUT MAINS PLUG INTO A 13
AMP POWER SOCKET.
do not use the mains plug without the fuse cover in place.
replacement fuse covers can be obtained from your local retailer.
replacement fuses are 13 amps and must be AstA approved to
Bs1362.
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private household in the 25 member states of the EU, in Switzerland and Norway may return their used
electronic products free of charge to designated collection facilities or to a retailer (if you purchase a similar
new one).
For Countries not mentioned above, please contact your local authorities for a correct method of disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and
recycling and thus prevent potential negative effects on the environment and human health.
IMPORTANT SAFETY INFORMATION
DecLaratIon of
conforMIty
manufacturer's Name:
manufacturer's Address:
declares that the product:
product name: dbx 160A
Note: product name may be suffixed by the eu.
product option:
None
conforms to the following product specifications:
safety:
iec 60065 -01+Amd 1
emc:
eN 55022:2006 (N/A; Analog product)
iec61000-4-2
iec61000-4-3
iec61000-4-4
iec61000-4-5
iec61000-4-6
iec61000-4-8
iec61000-4-11
supplementary information:
the product herewith complies with the requirements of the:
Low Voltage directive 2006/95/ec
emc directive 2004/108/ec.
rohs directive 2002/95/ec
Weee directive 2002/96/ec
With regard to directive 2005/32/ec and ec regulation 1275/2008
of 17 december 2008, this product is designed, produced, and classified
as professional Audio equipment and thus is exempt from this directive.
roger Johnsen
Vice president of engineering
8760 s. sandy parkway
sandy, utah 84070, usA
date: November 1, 2010
european contact:
Your local dbx sales and service office or
harman music Group
8760 south sandy parkway
sandy, utah 84070, usA
ph: (801) 566-8800
Fax: (801) 568-7583
dbx professional products
8760 s. sandy parkway
sandy, utah 84070, usA