Galaxy Audio Any Spot DHT-QUAD 사용자 설명서 - 페이지 7
{카테고리_이름} Galaxy Audio Any Spot DHT-QUAD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Audio Any Spot DHT-QUAD 12 페이지.
Galaxy Audio Any Spot DHT-QUAD에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지)
페이지 인쇄
Group and Channel Selection: Press "SET" button twice, "GROUP SELECT"
will display, press
or
shown on the left
. Press "SET"again , "
will display
, press
or
shown on the left
.
For best results when operating multiple systems, set all systems to
a single group, then set each system to a unique channel within that
group.
Auto Frequency Finder function on the Receiver:
Choose "AUTO CHANNEL SELECT" by pressing "SET" once,
. Receiver will automatically find a clear
then press
or
frequency with no interference as shown on the left
Receiver Volume Setting:
The receiver has an electronic volume control. Press
from the normal display (00 to 63), as shown on the left
Normal Display:
Frequency and Antenna A/B (RF Received) as left
Place the Transmitter "IR" window to face the Receiver "IR" window.
Then press the "ASC" button on the desired Receiver. The Transmitter
will automatically match the Receiver frequency.
Attention: The distance between the Receiver and Transmitter
IR windows should be less than 0.5m during the ASC IR setup. When
setting up multiple Transmitters/Receivers, activate the ASC function
of only one Transmitter and Receiver at a time.
HH76 and MBP76 Transmitter Status Display
Battery Status:
Battery Status Indicators for both the Handheld and Bodypack Transmitters
feature Four Level Displays as shown in
Group and Channel Display:
After completing the ASC, both the Handheld and Bodypack Transmitters
will display the Group and Channel numbers selected as shown in
Normal Display:
Both Handheld and Bodypack Transmitters will display Group and Channel
numbers as well as Battery Status as shown in
to choose the appropriate frequency group, as
MANUAL CHANNEL SELECT"
to choose the appropriate channel, as
1
.
3
.
or
.
.
2
.
.