DYNAPAR NorthStar RIM Tach 1250 사용 설명서 - 페이지 5

{카테고리_이름} DYNAPAR NorthStar RIM Tach 1250에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DYNAPAR NorthStar RIM Tach 1250 14 페이지. Digital tachometer

®
NorthStar RIM Tach
1250 Instruction Manual

1.1 General

These instructions do not claim to cover all details of variation in equipment or to provide for every possible contingency or
hazard to be met in connection with installation, operation, and service. Should further information be desired or should
particular problems arise which are not covered sufficiently for the purchaser's purposes, please contact Dynapar, or one of
its designated representatives.
1.2 Description
®
The RIM Tach
1250 is a high performance, reliable Digital Tachometer, designed to provide position and velocity feedback
from both AC and DC electric motors with pulse counts ranging from 60 through 2048 pulses per revolution. Designed for
NEMA 12.5 inch diameter type C-face motor frames, the RIM Tach 1250 utilizes rugged ductile iron casting construction,
and provides interchangeable sensor modules and a magneto-resistive technology capable of withstanding the harshest
industrial environments. This ensures a precise and consistent digital motor speed feedback.
®
The NorthStar RIM Tach
1250 is mounted directly to the motor frame and utilizes a patent pending, heavy-duty, one piece,
magneto-resistance sensor module with encapsulated surface mount electronics. The encapsulation provides resistance to
water, oil mist, dirt, high temperatures, and other harsh environments. The sensor module includes a 10-pin quick connector
requiring only a screwdriver for final electrical installation.
The non-contact magneto-resistive sensor and rugged
magnetized pulse wheel are designed and machined to function properly without any adjustments when assembled to Type
C-Face (12.5-inch diameter) motor frame and accessory mount. There are no bearings to fail or requirements for flexible
couplings since the magnetized pulse wheel assembly is attached directly to the shaft.
®
Figure 2: RIM Tach
1250 Specification Drawing
5
Dynapar (847) 662-2666
17 November 2008