Galaxy Audio Special Projects EVO Scan16 사용자 설명서 - 페이지 9

{카테고리_이름} Galaxy Audio Special Projects EVO Scan16에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Audio Special Projects EVO Scan16 16 페이지.

7.3 Charging The EVO True Wireless Fitness Transmitter

NOTICE: Prior to use, it is necessary to fully charge your EVO transmitter. Initial charge

from a depleted state may take up to four (4) hours or more.

NOTICE: The supplied charger is designed speciﬁcally for use with the EVO True Wireless

system. Use of any other charger may cause system damage and will void your

warranty.

●

Open the charger cover and insert the charging connector into the EVO as illustrated below. Only

the supplied wall charger should be used.

●

Insert the charging cable into the

charging adapter as illustrated at

right. Insert the cable fully.

●

Connect the charging transformer to AC power (that's 'manual talk' for 'plug it in to the wall').

●

Note that the EVO transmitter should be powered OFF while charging.

●

GREEN LED indicates battery charging.

●

GREEN LED will turn oﬀ when battery is charged.

IMPORTANT:

Close cover after charging!

Failure to close the cover may aﬀect water resistance and void your warranty. The charging

connector of your EVO has internal coating of silicone to further protect against corrosion.

Carefully re-applying a small amount of the supplied silicone on a monthly basis will keep the

connections protected. Part number SP-SG10, if you need more.

Similarly, after selecting your operating channel, be certain that the channel selector cover is closed

and secured. No silicone is needed here.