Hifonics BZE65C 빠른 시작 설치 매뉴얼 - 페이지 2

{카테고리_이름} Hifonics BZE65C에 대한 빠른 시작 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hifonics BZE65C 2 페이지.

Hifonics BZE65C 빠른 시작 설치 매뉴얼
Component installation
A
Factory location
behind door panel
Vehicles that have premium
sound systems will often
have separate tweeters in
a dash or door location.
Try to use this location for
mounting the component
tweeter if possible.
B
Custom location
If there is not a suitable
factory location for woofer
or tweeter to be mounted,
custom mounting may be
necessary. Before making
any permanent changes to
your vehicle make sure there
is adequate mounting depth.
C
Tweeter mounting
There are two primary
ways the tweeter can be
mounted. Surface and Flush
mounting. The fl ush mount
confi guration is shown here.
D
Crossover wiring
12dB/Oct Crossover
The crossover is necessary
INPUT
for the proper operation of the
component speaker system.
Make sure the wires are securely
attached and that there are no
stray strands of wire contacting
other terminals. Mount the
crossover to a secure surface
that is free of interference
from window mechanisms and
Input
Woofer
excessive moisture.
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it's discretion, repair or replace defective products during the warranty
WOOFER
TWEETER
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specifi cally excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
Tweeter
WARRANTY
847-540-7700
www.maxxsonics.com
HF BZE QSG 01 - rev1
Quick Start
Installation Guide
BZE65C
BZE65CX
BZE69CX