Hifonics zeus series 매뉴얼 - 페이지 3

{카테고리_이름} Hifonics zeus series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Hifonics zeus series 12 페이지. Zeus series
Hifonics zeus series에 대해서도 마찬가지입니다: 소유자 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (8 페이지), 사용자 설명서 (13 페이지)

Hifonics zeus series 매뉴얼
All manuals and user guides at all-guides.com
SUBWOOFER INSTALLATION AND WIRING DIRECTIONS

Enclosure Materials

Typically, 5/8" or 3/4" MDF (Medium Density Fiber Board) is best
for most applications. 3/4" MDF is recommended.
Enclosure Build Materials
Connecting joints need to be glued and screwed to ensure no
air escapes and joints do not separate under high pressure.
Mitered and rabbit joints also help to ensure the enclosure joints
are secure.
Bracing
Internal bracing is also recommended to prevent flexing and to
strengthen the enclosure.
Note: The volume taken up by the bracing should be added to the
total enclosure interior volume.
There are two common bracing methods.
1. Corner Bracing: These help prevent the connection joints
from separating under heavy vibration and air pressure.
Use 1' x 1" MDF at all interior joints
2. Diagonal Bracing: These internal braces connect the top side
to the bottom side as well front side to back side. This prevents
the wood from bowing or pushing outwards.
Use 1" x 2" with 1" surface contact that is glued and screwed.
Wiring
Wiring Parallel, Series or Parallel/Series will affect the final
impedance at the amp and great care must taken to ensure the
amp is not driven below it's intended impedance capabilities.
2