dbx AutoVelocity 160SL 백서 - 페이지 4

{카테고리_이름} dbx AutoVelocity 160SL에 대한 백서을 온라인으로 검색하거나 PDF를 다운로드하세요. dbx AutoVelocity 160SL 8 페이지.

AutoVelocity™ Dynamics and the dbx 160SL

too fast and still have the quick response of the VCA needed to tame transient

signals. This essentially means that AutoVelocity™ Dynamic circuitry creates a

fast "peak limiting" function which rides on top of a slower "compression"

function.

AutoVelocity™ Dynamics is now available on all dbx 160SL units

manufactured after January 1, 1998. A retrofit kit is available so that any dbx

160S can be updated to include this new technology. One might ask how this

retrofit kit affects the manual attack and release settings that were modeled

after the 165/165A. Die-hard fans of this sound, of course, would not want to

give up the sound they know and love for a different one. No problem, just

remove the lid of the 160S and depress a push-push type switch to disengage

the AVD circuitry in each channel, and instantly the original attack and release

characteristics of the 165/165A are restored giving the user ultimate flexibility

in compression needs. Instructions to do this are included in the manual for

new units and in the retrofit kit instructions for the existing units.

Figure 1. The graph on left shows the small step attack curve of the 160SL in response to a sine

wave burst input with AVD circuitry disengaged. The graph on the right shows the attack curve of

the 160SL to the same burst input with AVD circuitry engaged. Note the slower attack time in the

graph on the right.

Page 3

AutoVelocityª Dynamics and the dbx 160SL White Paper - November 1998