dbx QUANTUM 애플리케이션 매뉴얼 - 페이지 3

{카테고리_이름} dbx QUANTUM에 대한 애플리케이션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dbx QUANTUM 13 페이지. Digital multi-band processor
dbx QUANTUM에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

페이지 인쇄

dbx

Quantum

In-Ear Monitor Application Guide

Rear Panel Connections

Analog Input/Output Connectors

Each analog channel features both XLR and 1/4" TRS electronically-balanced connections that can

be used in balanced or unbalanced configurations.

MIDI In and Out/Thru Connectors

These connectors provide the QUANTUM with full MIDI functionality. The Out/Thru jack allows

you to use the QUANTUM at any point in a MIDI chain.

Sync In and Out Connectors

BNC connectors are provided for both clock in and out functions. The QUANTUM's custom dbx

VCXO clock chips are designed for low-jitter performance. You may use the QUANTUM as a mas-

ter clock source (i.e., you may slave other processors to the QUANTUM) or you may slave the

QUANTUM's clock to any other source device.

S/PDIF Digital Connectors

The QUANTUM's dual RCA connectors allow S/PDIF digital input and output. (The analog outputs

operate regardless of whether a digital output format is being utilized.)

AES/EBU Digital Connectors

AES/EBU input and output is facilitated through the dual XLR jacks.

IEC Power Cord Receptacle

The QUANTUM comes with an IEC cord and international power supply that accepts 100-240V, at

frequencies from 50-60Hz.

Front Panel

Analog Input and Output Level Controls

The QUANTUM's analog Input and Output controls adjust analog audio levels at the input and

output stages. (Note: The analog output level controls do not affect any digital processing or dig-

ital output levels.)

The QUANTUM is designed to interface as easily as possible with your current gear. Its wide-

ranging analog input and output gain controls allow connection at nominal levels of either

10dBV or +4dBu.