909 KSBL26CCG 사용 설명서 - 페이지 7

{카테고리_이름} 909 KSBL26CCG에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 909 KSBL26CCG 15 페이지. 26cc full crank key start petrol blower

•

Do not use the charger if it has been subjected to a

heavy knock, dropped or otherwise damaged in any way.

Take the charger to an authorised service centre for a

check or repair.

•

Do not disassemble the charger. Take it to an authorised

service centre when service or repair is required.

Incorrect re-assembly may result in the risk of fire, electric

shock or electrocution.

•

To reduce the risk of an electric shock, unplug the

charger from the power supply before attempting to clean

it. Removing the charging appliance alone does not

reduce the risk.

•

Never attempt to connect two chargers together.

•

Do not store or use the tool in locations where the

temperature may reach or exceed 104°F (40°C) such as

alongside sheds or metal structures in the summer.

•

The charger is designed for use from a standard

household electrical supply (230–240 volts). Do not

attempt to connect the charger to a supply with a different

supply.

Unpacking

Due to modern mass production techniques, it is unlikely

that your petrol blower is faulty or that a part is missing. If you

find anything wrong, do not operate the tool until the parts

have been replaced or the fault has been rectified. Failure

to do so could result in serious personal injury.

• Tube (2 pieces)

• Screws for tube assembly

• Fuel mixing bottle

• Spark plug tube spanner

• Starter Key

• Charger