Galaxy Audio TV10 사용자 설명서 - 페이지 4

{카테고리_이름} Galaxy Audio TV10에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Audio TV10 7 페이지. Wireless portable sound system plus txrm stationary transmitter

페이지 인쇄

Audio Link Transmitter Module

1. LCD Display

2. TX Indicator

3. Low Audio Level Indicator

4. High Audio Level Indicator

5. Enter Setting

6. Channel Selector

7. Power Switch and

Volume Control

Audio Link Transmitter

This module transmits the entire audio mix from one Traveler to another Traveler that is equipped with a wireless Mic/

Audio Link Receiver.

1. Turn the volume control (1-7) clockwise to turn on the transmitter.

2. The LCD display (1-1) will show "On" and the channel in use when the unit was last turned off.

3. To select a different channel, press the set button (1-5) and the channel will flash in the LCD display. Press the up or down

button (1-6) to select the transmit channel, and then press the set button again to enter the setting. The LCD will then

automatically display the selected channel. To display the frequency of the selected channel press and hold either the up or

down button.

4. Turn the volume control (1-7) to adjust the audio transmit level. Use this control in conjunction with the volume controls on the

receiving Traveler.

5. When transmitting signal, the TX indicator (1-2) will light Green to show the transmitting condition. The AF Level indicator lights

Yellow (1-3) to show a low audio level and lights Red (1-4) to show high audio level.

6. Set up the receiving Traveler according to the procedure outlined in: section

Select the same channel chosen on the transmitting Traveler.

page 9. Wireless Mic/Audio Link Receiver

(J)