Activox LifeChoice XYC105B 운영자 매뉴얼 - 페이지 11

{카테고리_이름} Activox LifeChoice XYC105B에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Activox LifeChoice XYC105B 16 페이지. Lifechoice activox portable oxygen concentrator

SPECIFICATIONS
ontinued
BATTERY LIFE TABLE
Run Time (@15 BPM)
Internal Battery
External Battery
OXYGEN CONCENTRATION OVER ALTITUDE AND FLOW RATE
Oxygen Concentration Over Altitude Range 0 - 4000 m
95%
90%
Oxygen
85%
80%
18
Pulse Setting
1 LPMeq
2 LPMeq
3 LPMeq
12 Hours
6 Hours
3 Hours
3 Hours
1 LPMeq
2 LPMeq
3 LPMeq
Flow Rate
Guidance and Manufacturer's Declaration - Electromagnetic Immunity
5 Hours
2 Hours
Discharge (ESD)
short interruptions
and voltage variations
on power supply
Power Frequency
EMC INFORMATION
Medical electrical equipment needs special precautions regarding
EMC and needs to be installed and put into service according to the
EMC information provided in the accompanying tables.
The LifeChoice
®
Activox Portable Oxygen Concentrator Model XYC100B is
intended for use in the electromagnetic environment specified below. The
customer or the user of the Model XYC100B should assure that it is used in
such an environment.
Immunity Test
IEC 60601
Compliance
Test Level
Electrostatic
+/-6 kV contact
+/-6 kV contact
IEC 61000-4-2
+/-8 kV air
+/-8 kV air
+/-2 kV
for power
for power
Electrical Fast
supply lines
supply lines
Transient/Burst
Not applicable
+/-1kV for
IEC 61000-4-4
input/output
lines
+/-1 kV
line-to-line
line-to-line
Surge
IEC 61000-4-5
+/-2 kV
line-to-earth
line-to-earth
< 5% U
T
(>95% dip in U
)
(>95% dip in U
Voltage dips,
T
for 0.5 cycle
for 0.5 cycle
40% U
T
(60% dip in U
)
(60% dip in U
T
input lines
for 5 cycles
for 5 cycles
IEC 61000-4-11
70% U
T
(30% dip in U
)
(30% dip in U
T
for 25 cycles
for 25 cycles
< 5% U
T
(>95% dip in U
)
(>95% dip in U
T
for 5 seconds
for 5 seconds
(50/60Hz)
3 A/m
Magnetic Field
IEC 61000-4-8
NOTE: U
is the a.c. mains voltage prior to application of the test level
T
SPECIFICATIONS
ontinued
Electromagnetic
Level
Environment - Guidance
Floors should be wood,
concrete or ceramic tile.
If floors are covered with
synthetic material, the
relative humidity should
be at least 30%.
+/-2 kV
Mains power quality
should be that of a typical
commercial or hospital
environment.
Mains power quality
+/-1 kV
should be that of a
typical commercial
+/-2 kV
or hospital
environment.
< 5% U
T
Mains power quality should
)
T
be that of a typical
commercial or hospital
environment. If the user of
40% U
T
the Model XYC100B
)
T
requires continued
operation during power
70% U
mains interruptions, it is
T
)
recommended that the
T
Model XYC100B be
powered from an
< 5% U
T
uninterruptible power
)
T
supply or a battery.
Power frequency magnetic
fields should be at levels
3 A/m
characteristic of a typical
location in a typical commercial
or hospital environment.
19