Dynapower TurboBox NA211A-LD 빠른 설치 매뉴얼 - 페이지 5
{카테고리_이름} Dynapower TurboBox NA211A-LD에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynapower TurboBox NA211A-LD 5 페이지.
페이지 인쇄NA211A-LD
External PCIe Slot Expansion Box
Note: You may see PCI Express Root Ports with different
ending numbers such as 2940, 2948, and 294A.
These different ending numbers indicate different
PCIe slots on motherboard.
If there is no third party PCIe card plugged in TurboBox,
you will see two PCI standard PCI-to-PCI bridges below
the PCI Express Root Port. When the third PCIe slot (x4)
on TurboBox is plugged with the third party PCIe card,
three PCI standard PCI-to-PCI bridges will be shown below
the PCI Express Root Port.
Note: If there is a yellow exclamation mark in front of the
third party PCIe card under PCI standard PCI-to-PCI
bridge, it means the third party PCIe card is without the
driver, so you have to install its driver on operating
system to make it work with the computer.
After the driver is installed on operating system, the third party
PCIe card will work properly with the computer via TurboBox,
and the name of the third party PCIe card will be shown under
PCI standard PCI-to-PCI bridge; furthermore, the name of the
third party PCIe card will also be shown in the list of
Device Manager.
‧For Mac OS X
To verify a successful installation on Mac OS X, select
About This Mac under the Apple icon.
Click More Info... from the window.
Click PCI Cards from the left side of the window, and
when there is no third party PCIe card plugged in
TurboBox, you will see three pci-bridges that indicate
three PCIe slots on TurboBox.
When a third party PCIe card is plugged in one of the
PCIe slots on TurboBox, the third party PCIe card will be
shown under the three pci-bridges.
When the driver of the third party PCIe card is installed
on Mac OS X, your computer will begin working with the
third party PCIe card on TurboBox.