Galaxy Audio DHX 사용자 설명서 - 페이지 12
{카테고리_이름} Galaxy Audio DHX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Audio DHX 20 페이지. Any spot wireless microphone system
페이지 인쇄DHXR System Setup
DHXR System Setup
GROUP
CHANNEL
SCAN
FREQ
1
GROUP
CHANNEL
SCAN
FREQ
2
GROUP
CHANNEL
SCAN
FREQ
3
GROUP
CHANNEL
SCAN
FREQ
GROUP
CHANNEL
SCAN
FREQ
4
GROUP
CHANNEL
SCAN
FREQ
5
Handheld
Body Pack
Transmitter
Transmitter
1
2
3
10
Receiver Programming
Group and Channel Selection: Press and Hold the SET button. The
Group number will flash. Press
group, as shown on the left
press
or
to choose the appropriate channel, as shown on the left
For best results when operating multiple systems, set all systems to a
single group: then set each system to a unique channel within that group.
Receiver Volume Setting:
The receiver has an electronic volume control. When in the normal display,
press
or
to control the output volume (64 steps total) as
left.
Normal Display:
Volume and Frequency, as shown at left
LED columns to the left of the LCD display show RF & AF Levels.
Automatic Transmitter Setup:
Once the desired channel is set on the Receiver, you may allow the
Transmitter channel to be set automatically. Note: only one Transmitter
may used with each Receiver.
Turn on the Transmitter. Position the Transmitter IR window directly in front
of the Receiver IR window. The IR window of the MBP77 Body Pack is
located under the battery door while the IR window of the HH65 Handheld
is located at the bottom end of the mic body. Press the ASC Button on the
Receiver. The ASC Icon
will light when the synchronisation is complete. The Group and Channel
number of the Receiver should now be displayed in the Transmitter LCD.
With the HH65, turn on the transmitter after pressing the ASC button.
Note: The Transmitter must be within half a meter distance from
the Receiver during IR ASC automatic channel setting.
HH65 and MBP77 Transmitter Status Display
Battery Status:
Battery Status Indicators for both the Handheld and Body Pack
Transmitters feature Four Level Displays as shown in
Group and Channel Display:
After completing the ASC, both the Handheld and Body Pack Transmitters
will display the Group and Channel numbers selected as shown in
Normal Display:
Both Handheld and Body Pack Transmitters will display Group and
Channel numbers as well as Battery Status as shown in
or
to choose the appropriate frequency
1
; press (SET) again , (CHANNEL) flashes,
4
.
will flash in the Receiver LCD. The RF Meters
5
2
.
3
shown at
1
.
2
.
3
.