DBZ DMi 4/3500A 사용자 설명서 - 페이지 11

{카테고리_이름} DBZ DMi 4/3500A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DBZ DMi 4/3500A 20 페이지. Professional power amplifier

페이지 인쇄

Binding Post Connector

Stereo/Parallel Mode:

Channel 1 red (+) / black (-) Binding posts are connected respectively to the positive (+) /

negative (-) terminals of speaker 1.

Channel 2 red (+) / black (-) Binding posts are connected respectively to the positive (+) /

negative (-) terminals of speaker 1.

Channel 3 red (+) / black (-) Binding posts are connected respectively to the positive (+) /

negative (-) terminals of speaker 1.

Channel 4 red (+) / black (-) Binding posts are connected respectively to the positive (+) /

negative (-) terminals of speaker 1.

Bridged Mode:

Channel 1 red (+) Binding post connected to the positive (+) terminals of speaker and

Channel 2 black(-) Binding post connected to the negative(-) terminals of speaker.

Channel 3 red (+) Binding post connected to the positive (+) terminals of speaker and

Channel 4 black(-) Binding post connected to the negative(-) terminals of speaker.

10.Fan Outlet

The fan draws air from the chassis.

Note: The output of all amplifiers will produce high voltage. Live installation is not allowed. There shouldn't be any excess bare copper exposed between the

speaker cable and the amplifier binding posts. In addition, please do not ground the amplifier output, or access to any other amplifier input or output. Please

use high-quality speaker connector and speakers dedicated cable, and minimize the power amplifier and speaker connection cable.

Rear Panel Introduction