Galaxy Audio Any Spot AS-1000T 사용자 설명서 - 페이지 6
{카테고리_이름} Galaxy Audio Any Spot AS-1000T에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Audio Any Spot AS-1000T 20 페이지. As-ck series uhf wireless camera systems
Galaxy Audio Any Spot AS-1000T에 대해서도 마찬가지입니다: 사용자 설명서 (20 페이지)
페이지 인쇄
AS-MBP5
AS-MBP5 Bodypack Transmitter
The bodypack transmitter operates on UHF band frequencies with PLL
synthesized control. 64 preprogrammed selectable UHF frequencies are
provided to avoid interference. Power is supplied by two 1.5V AA size batteries.
5
6
7
8
1.
Mini XLR connector: Input connection for a microphone or instrument cable.
2.
On/Off Switch: Turns transmitter power on and off.
3.
Low Battery LED: LED indicates battery status. Switching the power to "ON"
causes the LED to flash once and then go out indicating that the batteries have
sufficient power. If the LED stays on, it indicates that the batteries have insufficient
power and should be changed soon. If the status LED fails to flash, the batteries are
either dead or not positioned correctly, and you should correct the positioning or
replace or charge the batteries.
4.
Mic/Line Selector: The switch sets the audio input either to microphone level or line
level.
5.
Antenna: Permanently connected, helical antenna.
6.
Group Selector: Changes transmitter group setting. (for 8 selectable frequency
groups)
7.
Channel Selector: Changes transmitter channel setting. (for 8 selectable frequency
channels within each frequency group)
8.
Gain: The rotary control adjusts the sensitivity of the transmitter to the level of the
connected lapel/headset microphone or instrument.
9.
Battery Compartment: Insert two 1.5v AA dry or rechargeable batteries into the
compartment and make sure that the batteries are positioned for correct polarity.
10.
Charging Input: If rechargeable batteries are used they can be charged by using
the optional DC charger AS-DCC. Charging can take up to 10 hours.
3
PRODUCT DESCRIPTION
1
8
2
7
3
6
4
5
GROUP
1
8
2
7
3
6
4
5
CHANNEL
GAIN
1
2
4
9
CHARGING
INPUT
3
10