Galaxy Audio CoreLA4 사용자 설명서 - 페이지 10

{카테고리_이름} Galaxy Audio CoreLA4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Audio CoreLA4 12 페이지. Core12; core15; core18; corela4

SPECIFICATIONS

M8 Suspension Points (CR12 & CR15 only)

The Galaxy Audio Core Speaker Cabinets ship with (20) M8 bolts installed

into the suspension points. Install M8 threaded "Forged Shoulder Eye Bolts"

when using the suspension points. (Galaxy part# CRM8)

Only remove M8 bolts that will have suspension bolts installed to

prevent air leaks in the cabinet.

Rubber Feet

The Galaxy Audio Core Speaker Cabinets ship with (4) rubber feet included

but not installed. Install the rubber feet on the side of the cabinet facing the

floor to prevent the cabinet from "walking" or moving due to vibrations at high

volumes.

Step 1.) Remove the (4) M8 Bolts with a 3/16" Allen Wrench from the side of

the cabinet that will be facing the floor.

Step 2.) Orientate the rubber feet with the widest side towards the cabinet

and over the open suspension point hole.

Step 3.) Insert the M8 Bolt through the rubber foot and begin tightening down

the bolt with a 3/16" Allen Wrench.

Tighten the bolt down till the head of the bolt is below the top of the rubber

foot. Do not over tighten, this can cause the foot to become distorted.