Frigidaire 000 BTU Air-Conditioner 사용 및 관리 매뉴얼 - 페이지 7

{카테고리_이름} Frigidaire 000 BTU Air-Conditioner에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Frigidaire 000 BTU Air-Conditioner 11 페이지. Installation instructions
Frigidaire 000 BTU Air-Conditioner에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (10 페이지)

페이지 인쇄

Air Conditioner Features

(continued)

TO USE THE

ENERGY SAVER FEATURE:

Note: In this mode, the fan will continue to run for another 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes

at 10 minute intervals until the room temperature is above the set temperature, at which time the the cooling system turns back on.

TIMER: DELAY STOP / START

FEATURE:

Note 1: For Delay Stop, the unit must be in the On position.

Note 2: For Delay Start, the unit must be in the Off position.

First, PRESS TIME BUTTON

Then to adjust timer setting, tap or hold the UP arrow (

hours, then by 1 hour increments up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.). The Delay Start

mode automatically selects cooling with maximum Fan Speed. The temperature maintained will be the same as previously set. To change the

set temperature, press "COOL" then Up or Down arrows until the desired temperature is indicated on the display. After 5 seconds, the con-

trol will automatically change the display back to the hours remaining until the unit will start/stop. PRESSING the unit On/Off button at any

time will cancel the Delay Start/Stop function. The Delay Start/Stop Feature will work until the unit either starts or stops. Once that happens

he above steps have to be repeated again.

DO THIS:

PRESS

MODE BUTTON

CHOOSE

ENERGY SAVER

LIGHT ON

FIRST

DO THIS:

PRESS

TIMER BUTTON

THEN

DO THIS:

PRESS

TEMP/TIMER

SET BUTTON

LIGHT ON

) or the DOWN arrow (

) to change delay timer at .5 hour increments, up to 10

YOU WILL SEE:

YOU WILL SEE HOW MUCH

TIME IS CHOSEN: