Autonics LA8N-BF 매뉴얼

{카테고리_이름} Autonics LA8N-BF에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonics LA8N-BF 4 페이지. Lcd digital counters (indicator)
Autonics LA8N-BF에 대해서도 마찬가지입니다: 사용 설명서 (1 페이지), 빠른 시작 매뉴얼 (3 페이지), 빠른 시작 매뉴얼 (4 페이지), 제품 설명서 (4 페이지)

페이지 인쇄
Autonics LA8N-BF 매뉴얼
LA8N Series
DIN W48×H24mm, Indication only, LCD counter
Features
● Upgraded features
Voltage input and backlight model,
subtraction and decimal point setting functions
● No additional power due to internal battery
● Singal input method: No-voltage input, voltage input, free voltage input
● Screw terminal type(attaching terminal cover)
● LCD display
● IP66 protection structure
Please read "Caution for your safety" in operation
manual before using.
Ordering information
LA
8
N
Size
Digit
Item
Specifications
Model
LA8N-BN
Digit
8digit(Count up, down: -9999999 to 99999999 / Count up mode: 0 to 99999999)
Digit size
W3.4 × H8.7mm
Display method
LCD Zero Blanking type(Character height size: 8.7mm)
Operation method
Count up, down mode Count up mode
Power supply
Built-in battery
Battery life cycle
Approx. over 7 years at 20℃
Backlight power supply
-
Input method
No-voltage input
Residual voltage: Max. 0.5VDC
Count input
Short-circuit impedance: Max. 10kΩ
Open-circuit impedance: Min. 750kΩ
RESET input
No-voltage input
UP/DOWN,
Min. signal width
RESET input:
Min. 20ms
Max. counting speed
1cps / 30cps / 1kcps
External set switch
SW1
Insulation resistance
Min. 100MΩ(at 500VDC megger)
※4
Dielectric strength
2,000VAC 60Hz for 1minute
Mechanical 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hour
Vibra-
tion
Malfunction 0.3mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes
Mechanical 300m/s
Shock
Malfunction 100m/s
Ambient
temperature -10 to 55℃, storage: -25 to 65℃
Enviro-
nment
Ambient
35 to 85%RH, storage: 35 to 85%RH
humidity
Protection
IP66(When using waterproof rubber for front panel)
Accessory
Mounting bracket, Rubber waterproof ring
Approval
※5
Weight
Approx. 96g(Approx. 50g)
※ 1. SW1 is the front panel RESET key enable/disable set switch.
※3. SW3 is the decimal point set switch.
※4. No-voltage input, voltage input: between terminals and the case / Free voltage input: between the free voltage input
terminal and the RESET input terminal, between terminals and the case.
※Environment resistance is rated at no freezing or condensation.
※ 5. This weight is with packaging and the weight in parentheses is only unit weight.
J-4
L
-
B
N
-
Backlight
Input type
Power supply
LA8N-BN-L
24VDC±10%
RESET input:
Min. 20ms
※1
※2
※3
, SW2
, SW3
2
(Approx. 30G) in each of X, Y, Z directions for 3 times
2
(Approx. 10G) in each of X, Y, Z directions for 3 times
※A shaded (
No mark
None
L
Backlight function
N
No-voltage(Small signal) input
V
voltage input
F
Free voltage input
B
Internal lithium battery
N
DIN W48×H24mm
8
99999999(8digit)
LA
LCD Counter
LA8N-BV
LA8N-BV-L
Count up, down mode Count up mode
-
24VDC±10%
Voltage input
"H" level voltage: 4.5-30VDC
"L" level voltage: 0-2VDC
Voltage input
UP/DOWN,
RESET input:
RESET input:
Min. 20ms
Min. 20ms
※ 2. SW2 is the max. counting speed set switch.
Upgrade
) part is upgraded or added function.
LA8N-BF
Count up mode
-
Free voltage input
"H" level voltage: 24-240VAC
/6-240VDC
"L" level voltage:0-2VAC/0-2.4VDC
No-voltage input
RESET input:
Min. 20ms
20cps
※1
※3
SW1
, SW3