Autonics LE7M-2 매뉴얼 - 페이지 12

{카테고리_이름} Autonics LE7M-2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonics LE7M-2 13 페이지. W72xh72mm lcd week/year digital timers
Autonics LE7M-2에 대해서도 마찬가지입니다: 매뉴얼 (13 페이지), 매뉴얼 (13 페이지), 제품 설명서 (5 페이지)

페이지 인쇄
Autonics LE7M-2 매뉴얼
LE7M-2
⑤ ON time setting (AM, PM)
SUN MON TUE WED THU FRI SAT
⑥ ON time setting (hour, Min)
SUN MON TUE WED THU FRI SAT
⑦ Pulse width setting
SUN MON TUE WED THU FRI SAT
⑧ Complete to set
SUN MON TUE WED THU FRI SAT
※ It is able to set year of start/end date in yearly program
setting up to 2 years later from the present year.

Program Check, Modify And Delete

Weekly program check, modify and delete
RUN mode
Press
MODE
key
Press
CHECK
for 3 sec
key for 1 sec
Program 1 weekly program
record No.1 [ r01 ]
setting check
CHECK
Program 1 weekly program
record No.2 [ r02 ]
setting check
CHECK
Program 2 weekly program
record No.1 [ r01 ]
setting check
CHECK
N-92
key is pressed, move the
flashing to hour position and
select PM by
or
key
when ON time is afternoon.
Press
or
key twice to
set 10 and press
key
SET
after check 00 min
Press
or
key 4 times
to select pulse width as 5s
and press
key.
SET
Press
key to set ad-
SET
ditional program.
Press
SET
Program 1 weekly program
key for 3 sec
record No.1 [ r01 ] setting
modify and delete
Press
SET
Program 1 weekly program
key for 3 sec
record No.2 [ r02 ] setting
modify and delete
Press
SET
Program 2 weekly program
key for 3 sec
record No.1 [ r01 ] setting
modify and delete
Yearly program check, modify and delete
RUN mode
Press
key
Press
MODE
CHECK
for 3 sec
key for 1 sec
Program 1 Yearly program
record No.1 [ r01 ]
setting check
CHECK
Program 1 Yearly program
record No.2 [ r02 ]
setting check
CHECK
Program 2 Yearly program
record No.1 [ r01 ]
setting check
CHECK
※ YEAR turns ON when check, modify or delete yearly
program.
● If any key is untouched for 60 sec, it is returned to RUN
mode in weekly or yearly program check.
● In weekly or yearly program check, it controls output
according to program setting and output is OFF in
modify or delete mode.
● When
key is pressed in weekly or yearly program
MODE
record modify, delete stand by or delete mode, current
work is canceled and it is returned to check mode.
● Weekly or yearly program record modify and delete
(1) Program record modify
①When press
key over 3 sec in program check, EDT
SET
flashes in second display part, press
②It returns to check mode when finish the modify same
as the above procedure.
(2) Program record delete
①When press
key over 3 sec in program check, EDT
SET
flashes in second display part, press
CLR flashes in second display part and press
②Press CLR key over 3 sec when
display part, it returns to program check.
Press
SET
key for 3 sec
Program 1 Yearly program
record No.1 [ r01 ] setting
modify and delete
Press
SET
Program 1 Yearly program
key for 3 sec
record No.2 [ r02 ] setting
modify and delete
Press
SET
key for 3 sec
Program 2 Yearly program
record No.1 [ r01 ] setting
modify and delete
key.
SET
or
key until
SET
turns ON in second
SET
key.