activTek A1019B 설치 매뉴얼 - 페이지 4

{카테고리_이름} activTek A1019B에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. activTek A1019B 8 페이지. Electronic air purification system

Find suitable location for cell,

near the center of the coils.

Clean area to remove grease

or dirt. Place cell to attach

Velcro.

NOTE: Remove cell by

separating the Velcro. Press

Velcro attached to unit firmly

to ensure a good bond.

Replace cell into unit.

Connect cell wires to socket of

ActivePure cell. These wires

are a push connection; push

until firmly seated. They are

not connected when shipped

to allow for more options in

wire routing.

The ballast is shipped with the

voltage switch, located on the

end of the ballast, pre-set to

the 230V position. Ensure that

the voltage switch, is set to

the appropriate position for

your application.

NOTE: The 230V setting is for

208 & 230V applications.

Blue Wires

120 - 230 V

Voltage Switch

Red Wires

RED

BLUE

Blue Wires

Red Wires