DC MONT DC-LFP-BLK-135 사용자 설명서 - 페이지 3
{카테고리_이름} DC MONT DC-LFP-BLK-135에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DC MONT DC-LFP-BLK-135 4 페이지. Lifepo4 battery
페이지 인쇄PARAMETERS
Model
Nominal Capacity
Energy
Round-Trip Energy Efficiency:
Nominal Voltage
Recommended Charge Voltage
Standard Charge Current
Max. Charge Current
Standard Disharge Current
Max. Continuous Discharge Current
Max. Discharge Current(≤5S)
Max. Modules in Series/Parallel
Standard Operation Temperature
Charge Temperature
Storage Temperature
TROUBLESHOOTING
If any problems occur during battery operation, please refer to the following instructions or contact us for professional help.
PROBLEM
Overcharge
Over-current /short circuit protection
Over discharge
-
Temperature beyond normal ranges
Note: It is highly likely that your battery is damaged if it cannot be activated by the charger.
DC-LFP-BLK-100
100Ah
1280Wh
50A
80A
50A
80A
160A
SUGGESTED SOLUTION
Disconnect your battery from charging, and allow it to recover.
Disconnect your battery, if it recovers abnormally, please use LiFePO4
battery charger to activate it.
Built in BMS will automatically cut off its output and in this circumstance
-
are recommended to use LiFePO4 battery charger to activate your battery.
Built-in BMS will automatically disconnect the battery from the load, and
allow it to cool down or warm up to room temperatures. If your battery
recovers abnormally, please use LiFePO4 battery charger to activate it.
DC-LFP-BLK-135
135Ah
1728Wh
≥92%
12.8V
14.6V±0.2V
60A
100A
60A
100A
200A
2S/4P
-10~60°C
0~45°C
-10~45°C
,
MONT
DC-LFP-BLK-20
20Ah
256Wh
7.5A
15A
7.5A
15A
30A
, you