activTek EAGLE 5000 소유자 매뉴얼 - 페이지 7

{카테고리_이름} activTek EAGLE 5000에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. activTek EAGLE 5000 16 페이지. Electronic air purification system 100, 120, 220, and 240 volt systems

페이지 인쇄
activTek EAGLE 5000 소유자 매뉴얼

PURIFICATION PLATE INSTALLATION

*
* Chart refers to heavily contaminated areas
1
1. Remove the rear lint screen and the internal carbon filter (see page 6).
2
2. After determining the square footage (use the formula SQUARE FEET
= LENGTH X WIDTH) use the Purifier Setting chart (below or on the
faceplate of the unit) to determine the correct number of plates to
install.
3
3. Fully insert the needed purification plates (a,b,c) between the guide-
grooves in the sides of the plate cage (between the posts and clips)
making sure the metal clip on each side of the plate is in contact with
the metal screen on the plate.
4
4. Replace the carbon filter and reinstall the rear lint screen (page 8).
7