Autonics BM3M-TDT 제품 설명서 - 페이지 3

{카테고리_이름} Autonics BM3M-TDT에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonics BM3M-TDT 4 페이지. General photoelectric sensors

페이지 인쇄
Autonics BM3M-TDT 제품 설명서
Specifications
Model
BM3M-TDT
Sensing type
Through-beam
Sensing distance
3 m
Sensing target
Opaque materials
Min. sensing target
≥ Ø 8 mm
Hysteresis
-
Response time
≤ 3 ms
Light source
Infrared
Peak emission
940 nm
wavelength
Sensitivity
-
adjustment
Operation mode
Dark ON mode
Indicator
Operation indicator (red)
Approval
ᜢ ᜫ
Unit weight
≈ 170 g (≈ 240 g)
(packaged)
01)  Reflector (MS-2)
02)  Non-glossy white paper 200 × 200 mm
Power supply
12-24 VDCᜡ ±10 % (ripple P-P: ≤ 10 %)
Current consumption
It depends on the sensing type
Through-beam
Emitter: ≤ 45 mA, receiver: ≤ 45 mA
Reflective
≤ 40 mA
Control output
NPN open collector output
Load voltage
≤ 30 VDCᜡ
Load current
≤ 100 mA
Residual voltage
≤ 1.5 VDCᜡ
Protection circuit
Reverse power protection circuit, output short overcurrent protection circuit
Insulation resistance
≥ 20 MΩ (500 VDCᜡ megger)
Noise immunity
±240 VDCᜡ the square wave noise (pulse width: 1 ㎲) by the noise simulator
Dielectric strength
1,000 VACᜠ 50/60 Hz for 1 min
1.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y, Z
Vibration
direction for 2 hours
Shock
500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Ambient illuminance
Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx
(receiver)
Ambient temperature
-10 to 60 ℃, storage: -25 to 70 ℃ (no freezing or condensation)
Ambient humidity
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
Protection rating
-
Connection
Cable type
Cable spec.
Ø 4 mm, 3-wire, 2 m (Emitter: Ø 3 mm, 2-wire, 2 m)
Wire spec.
AWG22 (0.08 mm, 60-core), insulator outer diameter: Ø 1.25 mm
Case: ABS, sensing part: PC (through-beam type) or Acrylic (retroreflective,
Material
diffuse reflective type), bracket: SPCC, bolt: SCM, nut: SCM
BM1M-MDT
BM200-DDT
Retroreflective
Diffuse reflective
1 m
200 mm
01)
02)
Opaque materials,
Opaque materials
translucent materials
≥ Ø 60 mm
-
≤ 10 % of sensing
-
distance
-
YES (Adjuster)
Light ON mode
Dark ON mode
(option: Dark ON mode)
ᜢ ᜫ
ᜢ ᜫ
≈ 105 g (≈ 188 g)
≈ 88 g (≈ 156 g)
Feature Data: Through-beam Type
■ Sensing area
Emitter
Receiver
■ Emitter angle
Emitter
Receiver
Feature Data : Retroreflective Type
■ Sensing area
Reflector
Sensor
■ Sensor angle
Reflector
Sensor
■ Reflector angle
Reflector
Sensor
• BM3M-TDT
3
2
1
0
400
200
0
200
400
Left ← Center → Right
Operation area ℓ (mm)
• BM3M-TDT
3
2
1
0
40
20
0
20
40
Left ← Center → Right
Operation angle Θ (°)
• BM1M-MDT
1.0
0.5
0.3
0.0
40
20
0
20
40
Left ← Center → Right
Operation area ℓ (mm)
• BM1M-MDT
1.0
0.5
0.3
0.0
40
20
0
20
40
Left ← Center → Right
Operation angle Θ (°)
• BM1M-MDT
1.0
0.5
0.3
0.0
40
20
0
20
40
Left ← Center → Right
Operation angle Θ (°)