dynarex DynaRide 10220 매뉴얼 - 페이지 4
{카테고리_이름} dynarex DynaRide 10220에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. dynarex DynaRide 10220 6 페이지.
페이지 인쇄WARNINGS
Do not adjust or operate wheelchair without carefully
reading all instructions in this manual.
Do not operate this wheelchair on roadways, streets or any
surfaces with vehicular traffic.
Do not operate on inclines without proper assistance.
When getting in and out of wheelchair or when in elevator or
wheelchair lift, wheel locks must be fully engaged.
Wheelchair should be on a smooth, stable and level area
with wheel locks engaged before transferring user in or out
of wheelchair.
Footrest should not be lower than 2½" from the ground to
ensure clearance.
Do not stand on or apply weight to foot rests.
Rotate casters to front of the wheelchair and engage wheel
locks to help prevent wheelchair from tipping over before
reaching or leaning forward.
When trying to extend arms over back, only reach as far as
your arm can extend without having to alter your seating
position. Do not lean over or apply weight to the top of
wheelchair back. This can cause wheelchair to tip over.
DO NOT stand on wheelchair.