Ihara VT300 사용자 설명서 - 페이지 3

{카테고리_이름} Ihara VT300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ihara VT300 16 페이지. Digital portable microscope

(16)

Lens: the lens is applied to photography.

(17)

Battery Container: Where is the Li-ion battery put. [please refer to item (5) of Section 1.5].

(18)

RESET Hole: in case the machine stops (which means no reaction in the image by pressing any button), insert slender clip into the

hole to trigger the RESET button.

(19)

USB Connection Port: the port is applied to connect USB device to computer [please refer to item (6) of Section 1.4 and item (1) of

Section 1.5].

(20)

Handing Hole: a hanging hole for the Wrist Strap [please refer to item (4) of Section 1.5]

1.3 Operation of Microscope

First, please choose long shot or flush-way shot, then adjust the focus button.

(1) Focus way: the focus dial is labeled to indicate the magnification amount (10x, 40x, and long shot). Rotate the wheel of focus to position

(A) is for long shot, to (B) is low optical magnification (10x), and to (C)is High optical magnification (40x). Adjust photograph distance

(height) to get one to ten times of magnification consecutively. Rotate the dial to right for smaller magnification, and to the left for larger

magnification. You may find symbol represents the magnification rate. Please see below image, the indicator is under the position of

10x (

) magnification.

(2) Horizontal contact: there are two focus points (10x & 40x) in horizontal-contact observation, slightly tuning theblack indicator so that to

get the clearest image quality

(3) Long Shot: Rotate the Focus dial next to 10X's right side, then slightly tuning so that to get the best image. Photography is same as the

way of camera and scene mode is selectable. [please refer to (B) of item (1) of Section 1.4].

1.4 Microscope Programming Functions

There are 8 function modes in the programming interface. Press the Function Menu /Delete button to switch functional modes in the