activTek INDUCT 5000 매뉴얼 - 페이지 11
{카테고리_이름} activTek INDUCT 5000에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. activTek INDUCT 5000 16 페이지. Electronic air purification system
activTek INDUCT 5000에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지)
페이지 인쇄CHANGING THE ACTIVEPURE® CELL
WARNING: UV Light in operation. Disconnect unit from power supply before
Unplug unit. If the unit is hard wired,
1.
be sure the power to the unit is off.
Always follow OHSA electrical lockout
safety requirements to prevent
Accidental release of energy during
service or maintenance activities
3.
Remove the thumb screws on either
side of the ActivePure
the cell from the ballast assembly.
servicing. Failure to follow warnings may result in severe eye damage.
Cell to remove
®
2.
Remove the activTek INDUCT ballast
assembly by removing the four (4)
thumb screws and sliding the unit out.
4.
Replace ActivePure
reversing steps 1-3.
Cell by
®
11