Autonics ARD-A Series 매뉴얼 - 페이지 4
{카테고리_이름} Autonics ARD-A Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Autonics ARD-A Series 10 페이지. Devicenet remote i/o analog, terminal block type
Autonics ARD-A Series에 대해서도 마찬가지입니다: 제품 설명서 (4 페이지)
페이지 인쇄Status LED
※ Status of MS LED, NS LED
No.
Type
LED status Color
MS
Green
1
NS
Green
MS
Green
2
NS
-
MS
Green
3
NS
Green
MS
Red
4
NS
-
MS
Red
5
NS
-
MS
Red
6
NS
Green
MS
Green
7
NS
Red
MS
Red
8
NS
Red
MS
Green
9
NS
Red
Dimensions
105
50
DeviceNet Analog Remote I/O
Descriptions
Normal operation
I/O communication or message communication is
working.
Standby of duplicated address
The status of standby for receiving message of
duplicated address check from master unit.
Standby of normal operation
The status of standby for establish connection from
master unit.
Watchdog timer error
The status that DIP switch or another switch
setting is invalid.
Switch setting error
The status that DIP switch or another switch setting
is invalid.
Changed address during normal operation
The status that address is changed during normal
operation.
Invalid address
The status of setting invalid address
Duplicated address
There is duplicated address in the network.
Occuring Bus-Off error
Communication is stopped with Bus-Off.
I/O Connection time out
3-Ø4.5
35.3
(
: ON,
: Flash,
Troubleshooting
-
-
-
Change the switch with valid
value and re-supply the power.
Change the switch setting to valid value
and re-supply the power.
Change the initial address at the power
applied at first.
Change the valid address and re-supply
the power.
Change node address not duplicated.
Power on the slave unit again. Check
master unit, communication, cable,
terminating resistance and noise of
network.
Check the master setting and the user
program.
●Panel cut-out
50
3-M4 Tap
: OFF)
SENSORS
CONTROLLERS
MOTION DEVICES
SOFTWARE
(J)
Temperature
Controllers
(K)
SSRs
(L)
Power
Controllers
(M)
Counters
(N)
Timers
(unit: mm)
(O)
Digital
Panel Meters
(P)
Indicators
(Q)
Converters
(R)
Digital
Display Units
(S)
Sensor
Controllers
(T)
Switching
Mode Power
Supplies
(U)
Recorders
(V)
HMIs
(W)
Panel PC
(X)
Field Network
Devices
X-27