iHealth BP5 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} iHealth BP5에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. iHealth BP5 5 페이지. Wireless blood pressure monitor
iHealth BP5에 대해서도 마찬가지입니다: 소유자 매뉴얼 (17 페이지), 빠른 시작 매뉴얼 (4 페이지), 소유자 매뉴얼 (13 페이지)

페이지 인쇄
iHealth BP5 빠른 시작 매뉴얼
Connect to Android Device via Bluetooth
• Put on the monitor or press the START/STOP button, the
indicator will begin flashing.
Bluetooth
• Turn
Bluetooth
device.
• When using the monitor for the first time, you should pair the
monitor to the Android device. Wait until the model name printed
on the monitor, (i.e. "BP5 xxxxxx") appears in the
menu,and select the model name "BP5 xxxxxx" to pair. it may
take up to 30 seconds for your Android device to detect the
signal.
Bluetooth
• Launch the "iHealth MyVitals" app to start using your monitor.
• Please repeat these steps when you switch to another Android
device with the monitor.
Monitor Status
Waiting to connect
Connected and measuring
Measurement completed and
ready to disconnect

MEASUREMENT PROCEDURES

Blood pressure can be affected by the position of the cuff and your
physiologic condition. It is very important that the cuff should be
placed at the same level as your heart.
Body Posture
Sitting Comfortably During Measurement
a. Sit with your feet flat on the floor without crossing your legs.
b. Place your hand palm-side up in front of you on a flat surface such
as a desk or a table.
c. The center of the cuff should be at your heart level.
"On" under the "Settings" menu on the Android
Bluetooth Indicator
Flashing blue light
Steady blue light
Gradually extinguishing light
Bluetooth