Galaxy Press GS-205B Plus 운영 매뉴얼 - 페이지 9

{카테고리_이름} Galaxy Press GS-205B Plus에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Press GS-205B Plus 13 페이지.

Galaxy Press GS-205B Plus 운영 매뉴얼
8.Temperature Calibration
8.1 Press "set" button for 4 seconds to
enter into second level menu.Display
as below.(see figure 8.1)
8.3 press "up" and "down" button to make
temperature calibration.
if temperature on heater is higher than
circuit board shows,pls lower the Pb
value.
Example:
Heater temperature:190C
Circuit board temperature:185C
Pls set Pb Value at ( -5 )
8.1
8.2 Press "set" button to select "Pb" mode
(See figure 8.2)
8.4 Press "set" button 4 seconds to quit.
If temperature on heater is lower than
circuit board shows,pls raise the Pb value.
Example:
Heater temperature:185C
Circuit board temperature:190C
Pls set Pb Value at ( +5 )
9
8.2