Galaxy Press GS-207M 운영 매뉴얼 - 페이지 8

{카테고리_이름} Galaxy Press GS-207M에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Galaxy Press GS-207M 19 페이지.

5.Printing And Pressing

5.1 Once heater reaches start

temperature,put bottles inside of mug heater

5.3 Then close handle to start transfer

printing process.

Remark:

1. Station 1/2 must work with two mugs inside together, working only with 1 mug inside

will damage the machine.

2. Station 3/4 must work with two mugs inside together, working only with 1 mug inside

will damage the machine.

3. Each heater's temperature is separately controlled by different triac, can be calibrated

separately. But we do not suggest customer make calibration unless there is a need.

5.1

5.3

5.2 Adjust suitable pressure by turning

pressure knob.

5.3 Once printing process is over, buzzer

will alarm and open the handle then take

out bottles out of machine.

5.2

5.4